versatility and power of the Maxi-Pro 2D!
18 HP twin nozzle output, with remote direction control high output
capability for larviciding
The MAXI-PRO 2D is the most versatile member of the MAXI-Pro family of
truck mounted ULV applicators. The output of the diaphragm pump enables the
MAXI-Pro 2D to be used for adulticiding, producing 90% of the droplets below 20
microns. At higher flow rates, droplets of 40-50 microns will be produced for
larviciding or barrier spraying.
The outstanding feature of the MAXI-PRO 2D is the remote control of the
nozzle direction through 180� horizontally, and 100� vertically, enabling more
specific placement of the droplets with the driver having to leave the cab. This
feature can be particularly valuable when barrier spraying or larviciding and
when adulticiding in areas obstructed by walls, hedges and buildings the
operator can elevate the nozzles to assist the droplets pass over such
obstructions. Designed and built from over 50 years experience, from only the
highest quality materials, with rigorous quality control at all stages of
manufacture. The pump is housed in a fiberglass waterproof enclosure, and only
an epoxy chemical resistant paint is used on all parts.
Optional extras: 12V battery, automatic engine choke and idle back. For other
truck mount options see separate literature.
Backed by Dyna-Fog's 2 year warranty and a worldwide network of factory
Vehicle mounted ULV/LV Applicator
||18 hp, Briggs & Stratton,
twin cylinder, 4 cycle gasoline, electric start with alternator |
||Direct drive, rotary positive
Output up to 400 cfm air.
0-128 oz (3.8 1)/min
||Twin Dynafog�MultimistT with
remote directional control of boom.|
||Corrosion and UV resistant
||Formulation: 15 gall (57 l)
with lockable cap Gasoline 12.5 gall (47 l) with guage.|
hrs running time
||1 gall (3.8 l)|
||in (cm) Length x Width x
||Length x Width x
|Shipping Weight Volume